SEMA 2024: 1959 Chevrolet Apache Pickup by Stafford’s Garage

The introduction of the Chevrolet C/K series in 1960 was a turning point for pickup trucks. More than 60 years later, the C/K series is still highly regarded by enthusiasts and collectors. But before that was the Task Force line of trucks from 1955-1959.

At the 2024 SEMA Show, nestled among the heavy hitters in the Toyo Tires Treadpass pavilion, I stopped in my tracks to admire this custom 1959 Chevrolet Apache Fleetside nicknamed “Thunderchief.”

This stunning ride was built by Chris Stafford of Stafford’s Garage. Based in Las Vegas, Stafford’s Garage turns vintage metal into rolling pieces of art. With “Thunderchief,” Stafford has raised the bar for what a restomod can be, blending postwar design with modern materials and craftsmanship.

The Apache’s big window cab distinguishes it from the small back window C10s that followed, but it’s the deep, dark gray metallic paint that pulls you in. The color is rich and lustrous, looking elegant in the shade, but sparkling in the sunlight.

Against this moody exterior, the truck has a full custom red interior. I’m talking seats, carpet, dash, door panels, everything! Bits of chrome accents break up the sea of redness.

Inside, every detail is executed with care. The interior maintains the truck’s heritage with new reproduction gauges and an original-style radio. The red leather-wrapped chrome steering wheel with flat bottom is a modern touch in this classic truck interior.

“Thunderchief” rides on a set of 20-inch Raceline billet wheels. The wheels have a slotted design with a polished lip and are color matched red with silver accents.

They sort of remind me of monoblock style wheels on a Mercedes, but with tri-bar center caps. I think these wheels complement the truck’s smooth body lines and aggressive stance. It’s the kind of setup that says this is a show truck, but it can still haul stuff if needed.

One of the standout features of this build is the flawless chrome work. Every piece, from the bumpers to the trim, is polished to a mirror finish. The side of the bed has beautiful chrome and red trim pieces that just work on a 1950s era truck. It’s the kind of meticulous detail that separates good builds from great ones — and “Thunderchief” is firmly in the latter category.

Among the thousands of vehicles at SEMA, only about two dozen have the honor of getting invited to the Toyo Tires Treadpass pavilion. This area houses a curated group of elite custom builds, any one of which could be on a magazine cover. This Apache pickup certainly deserved its place among these special vehicles.

I will keep my eyes out for more vehicles from Chris Stafford and Stafford’s Garage in the future. The craftsmanship and detail shown in “Thunderchief” really shows what they are capable of building, while staying true to the spirit of the original truck.

For more, follow @staffords_garage on Instagram.

Barrett-Jackson 2017: 1979 Ford F-100

This one goes to eleven. Black paint, supercharged small block Ford with over 600hp, 3.70:1 end and a TKO 5-speed. Chrome everywhere and classic f-series looks. It has an image that says, “Clear a path.” 

I was drawn immediately to this truck upon seeing it, and I must have not been the only one as it went for $16,500 on the Scottdale auction block. 

If you’d like to see the lot listing for this truck, please click here. 

Barrett-Jackson 2016: 1970 GMC K1500

image

Despite my love for trucks, I’m admittedly not well versed in their history and model differences. When it comes to GMC, I know less than I do about it’s sister brand – my favorite truck brand – Chevrolet. Now when we talk about GMC trucks 1973 or newer, it’s really a moot point: Badge engineering is in full force. To that extent I can’t believe that people still buy into that “professional grade” nonsense they shill on the TV. It’s the same truck as the Chevy with some trim differences.

image

Despite my lack of knowledge, I do know some GMC fun facts. A 1960 model could be had with a GMC-specific 370ci Oldsmobile-derived v8. They also ran some Poncho v8s for a while in the 50’s.

image

Long before the Internet was a prolific source for knowledge, my dad showed me my first 60 degree, 305 cubic inch GMC v6 in a dump truck he had bought at auction.

image

Thanks to the Internet I found out that huge 5.0L v6 was actually the smallest one GMC made and that they even had a v12 derived from that family. And while I’m on the topic of the v6, I would be remiss if I didn’t mention the plaid valve covers available on the half tons of the 60s.

image

What’s the point in glossing over this history? Well its not because I’m trying to show off. I’m sure I’m not long for an email or comment regarding how little I know from a truly die hard fan who is scoffing to themselves as they read this now.

The point is that I’m still learning passively with each vehicle I see at trade shows , car shows and meet ups. This is just one reason why I’m so strongly against the current homogenized restomod approach to building an older car or truck. You take a bit of what made unique, to impress the people that can only handle things that are easy, familiar and the same as everyone else.

image

This 1970 GMC may not be anything flashy with its “350 crate motor” which is probably a goodwrench v8 that’s surely slower than what it had stock. The mild 2 inch lift and automatic transmission with shift kit don’t really bring much excitement to the table either. To me, this truck in it’s current state of modification is a great period piece of when Bigfoot was new and this truck was only a decade and a half off the lot. It’s aspiring to be something the everyman couldn’t yet achieve.

What would it add to this truck if it were to become victim to the latest trends? Flared prerunner fenders, late model bucket seats and an LS motor? I feel like at that point you’re just taking away from what it was.

I guess what’s funny to me is that what I learned is so minor in compared to my view of the history of this truck. I just always assumed GMC used the same 10/20/30/40 etc sequence for designating the tonnage of their trucks that Chevy did. When I first read 1970 1500, I figured it must have been an error on the owner’s part. However, I was wrong.

Huh, learn something new every day.

78-83 Toyota Hilux Extended Cab Long Wheelbase Dually Truck

I spotted this thing stuck in rush hour traffic as I cruised on past in the HOV lane.  I can’t find much about it, it may have even been imported from Mexico?  It does have Arizona plates on it so who knows.  There probably aren’t too many like this out there so go ahead and soak it in. Continue reading

Chevrolet Twin Turbo V8 Hot Rod

I ran across this Chevrolet hot rod at a church car show in Glendale. While I like the twin turbo V8 engine and the wide rear tires, there are a lot of details about the truck that leave me scratching my head. Take the sword sticking out of the driver’s side fender for example: what’s that all about?

From the back, we can see the huge aluminum wing which I think looks too new on such an old truck body. Why is it installed backwards? Is it an aesthetic thing, or does the owner really not realize that it’s backwards? The “Jesus Saves” taillights obviously reflect the owner’s personality, and while they are definitely an original idea, it’s not one that I am a fan of.

The utter simplicity of the twin turbo installation here is pretty cool. However, the flex pipe exhaust and various dice pieces accenting the engine bay make this thing look more shoddy than “DIY cool.” Don’t get me wrong, I really want to like this truck! However, the owner has gone overboard with personal touches that I feel don’t really blend together.

Still, I bet it goes like hell when he puts the pedal down!