Tag Archives: SEMA

SEMA 2025: The 2017 Lincoln Continental V10 Swap That Shouldn’t Exist (But Does)

Posted on by
Reply

Every year at SEMA you get used to the usual pattern.

Rat Rods. Diesel swaps. Twin turbo setups making 1500 horsepower. Restomods that cost more than a house. And then, buried somewhere between the corporate booths and the endless rows of first-gen Camaros, you find something that makes you stop walking for a second and just stare at it like you’re trying to figure out if it’s real or if you are just dehydrated after spending too long in the Las Vegas sun.

This year, that thing was a 2017 Lincoln Continental with a V10 shoved into it.

Not swapped in. Not “cleanly integrated.” Shoved in. With intent.

Built by Diego and Jack over at Build It Yourself (@biy_buildityourself), this Continental has been their personal 3-year quest to answer a question nobody asked:
“What if we took a modern front-wheel-drive luxury sedan and turned it into something that sounds like it escaped a prototype F1 testing program?”

And then, instead of stopping there…they kept going.

The Engine Situation Is Completely Unreasonable

Under the hood sits a 6.8L V10 sourced from a Ford truck. That alone would be enough for most people to call it a day, post a YouTube video, and go buy another project car to ruin. But that’s not what happened.

They went full send and built custom cylinder heads by literally cutting up and welding together four Ford V8 heads into two 4-valve heads for a V10. The result is what they’re calling the world’s first Ford 6.8L 4-valve V10.

As if that weren’t enough, the guys also fabricated custom camshafts, and a custom intake manifold for the engine. The whole thing runs on a FuelTech FT550 standalone ECU.

This is so much more than an engine swap, it’s re-engineering the entire car for a purpose it was never meant to serve.

At some point you have to assume they stopped asking “should we?” and switched entirely to “how hard could it be?”

Re-Engineered for Performance

From the factory, this Continental was front-wheel drive with an automatic transmission. Now it’s rear-wheel drive with a manual.

The guys swapped in a Getrag MT82 6-speed, which required fabricating a transmission tunnel into the floor pan like it was no big deal.

There’s something deeply amusing about a modern luxury sedan being forcibly converted into a layout it never had any intention of accepting. It’s like convincing a well-dressed accountant to start drifting.

The Subtle Parts That Are Not Subtle At All

Underneath all of this chaos is a Mustang subframe, because apparently nothing says “this belongs together” like mixing luxury sedans with pony car suspension geometry.

The full custom exhaust system has been fabricated to the point where it sounds like an F1 car. It sounds absolutely unreal coming from a sedate-looking sedan.

There are also a number of 3D printed components throughout the build, such as the custom intake ducts. It’s satisfying how this build combines traditional fabrication and modern prototyping methods, like 3D scanning and design.

It Still Looks Like a Lincoln (Which Is the Weirdest Part)

The most unsettling part of the whole thing is that, from a distance, it still looks like a normal 2017 Continental. It has the stock body lines, and even retains the stock wheels. The only hint (aside from the sound) is the custom front bumper with forged carbon fiber air dam and accents.

And then you realize that underneath what looks like a quiet luxury sedan is a hand-built mechanical science experiment.

That mismatch is what makes it interesting.

Built in a Garage. Not a Facility. A Garage.

The part that sticks the most is not the spec sheet, it’s the origin story. This wasn’t built by a manufacturer, or a professional race shop, or a corporate-backed SEMA program with a marketing department and a render artist.

It was built by two guys in a home garage in Michigan. Which raises the uncomfortable question of what exactly separates “professional engineering” from “extremely determined individuals with too many tools and access to YouTube.”

Because at a certain point, the line gets blurry. And this car is way past that line.

Recognition at SEMA

Somehow, among everything else at the 2025 show, this Continental earned Pick of the Show from automotive photographer Larry Chen.

Which feels appropriate. Not because it’s perfect, but because it’s exactly the kind of thing that makes SEMA still worth walking through—something that shouldn’t exist, does exist, and forces you to rethink what is possible for a production car platform.

Final Thoughts

A modern Lincoln Continental was never supposed to become a V10, rear-wheel-drive, manual-transmission, garage-built engineering thesis with welded cylinder heads and an F1 soundtrack.
But that’s kind of the point.

This isn’t really about performance numbers or refinement or even whether it makes sense.

It’s about two people looking at a normal car and deciding, very calmly and very deliberately, that it wasn’t interesting enough yet.

And then fixing that problem the hard way.

Follow Build It Yourself:

https://www.youtube.com/@biy_buildityourself
https://www.instagram.com/biy_buildityourself/

SEMA 2025: 1970 Plymouth Roadrunner “Haraka” by Pure Vision Design

Posted on by
Reply

Officially, the SEMA Show is a trade show for automotive industry professionals to meet and do business. Unofficially, the main attraction is the more than 2,000 custom vehicles on display throughout the massive convention halls.

While some custom car builders focus on originality, the cars that catch my eye are the “restomods,” cars which blend classic style with modern performance parts and technology. I love walking the show floor and discovering a great custom car build that has modern paint, suspension, brakes, and power, while retaining the character that made the car special in the first place.

One vehicle that caught my eye at the 2025 SEMA Show was this 1970 Plymouth Road Runner “Haraka” by Pure Vision Design. I have followed Steve Strope and his shop for years, and I am a big fan of their work. The name Haraka comes from the Swahili word for “speed,” which seems fitting for a car built with both performance and drivability in mind.

Finished in a striking dark purple paint color, this Roadrunner commands attention from every angle. The car rides on a set of gold HRE wheels with polished hoops, wrapped in Michelin performance tires. Behind those HRE wheels is a Wilwood disc brake system featuring the company’s new electric parking brake setup.

The suspension has also received a significant upgrade. Pure Vision equipped the car with independent front and rear suspension systems from Heidt’s, which is now available for B-body Mopar vehicles. This modern suspension setup provides a substantial improvement in handling and comfort compared to the original 1970 Road Runner.

Power comes from a Chrysler 440 V8 that has been stroked to 494 cubic inches. The engine is equipped with Edelbrock cylinder heads and a performance camshaft, producing an estimated 550 to 600 horsepower. The block is painted in Hemi Orange, which absolutely pops beneath the one-off carbon fiber cross-ram intake manifold. This custom piece really sets this car apart from other custom builds.

The engine is managed by a MoTeC ECU. Power is sent to the rear wheels through a Tremec TKX five-speed manual transmission paired with an American Powertrain bellhousing.

A custom fuel tank from Rick’s Tanks houses a late-model Chevrolet Camaro Z28 fuel pump, helping supply the fuel demands of the modernized big-block engine.

“Haraka” is the first street-legal vehicle to feature a comprehensive, header-back carbon fiber exhaust system, including fully integrated carbon fiber mufflers.

While the exterior and drivetrain are impressive, the interior may be the most interesting part of the build. Rather than creating an entirely new interior, Pure Vision incorporated components from several different Chrysler vehicles. The dashboard was sourced from a 1966 Plymouth Fury II, while the center console comes from a 1972 Plymouth Duster. An overhead console from a 1973 Plymouth Barracuda Gran Coupe completes the collection of vintage Mopar parts.

The full custom interior is trimmed in brown leather and features 18-way power seats from a Porsche Panamera with both heating and cooling functions. Modern conveniences include Vintage Air climate control, Dakota Digital gauges, and a Kicker audio system with Bluetooth connectivity.

The Haraka Road Runner is an excellent example of how a builder can combine components from different eras to create something unique. From its modern suspension and fuel-injected big-block engine to its carefully curated interior, this is a car that respects its Mopar heritage while embracing modern performance and comfort. It was one of the more memorable custom builds I encountered at the 2025 SEMA Show.

Follow Pure Vision Design:

https://www.purevisiondesign.com/
https://www.facebook.com/PureVisionDesign
https://www.instagram.com/purevisiondesign/

SEMA 2024: 1966 Ford Bronco “Pure” by RMD Garage

Posted on by
Reply

It is no secret that classic Broncos are enjoying a surge in popularity in recent years. With the introduction of the new Bronco in 2021 and the growth of the overlanding segment, classic 4x4s are hotter than ever. At the 2024 SEMA Show, one build stood out with timeless style and modern engineering: a fully reimagined 1966 Ford Bronco nicknamed “Pure.”

Restored and customized by RMD Garage, this stunning build captivated crowds in the Toyo Tires Treadpass area with its clean lines, polished chrome, and beach-ready charm.
“Pure” isn’t just a restored classic; it is a complete transformation. RMD Garage, the Long Beach, California-based custom shop founded by Ralph Holguin, has a long-standing reputation for elevating vintage vehicles into rolling works of art. You might even remember the shop from its one-season show on Motor Trend in the mid-2000s. At SEMA, RMD showed that their passion for bespoke builds has only grown since then.

The foundation of the Bronco build is an all-new Kincer Chassis, which gives old trucks a new lease on life, offering improved strength and reducing chassis flex. Better yet, it is officially licensed by Ford. The redesigned frame is two inches wider inside, creating crucial room for upgraded components like modern drivetrains, long tube headers, and transfer cases.

Powering “Pure” is a Ford 5.0L Coyote V8, a favorite among restomod builders for its combination of performance and reliability. Stopping power is provided by Wilwood disc brakes, which are a massive upgrade from the original 1960s brake system.

But it’s the attention to detail that truly defines this build. Every bolt on the truck has been replaced with new ones that are engraved with “RMD Garage” on the heads. That alone must have added thousands to the cost of this build, ordering entirely new hardware with custom engraving! It is details like this that elevate a SEMA build above a simple restoration.

Step inside, and the Bronco reveals a cabin more refined than most luxury SUVs. The interior is a blend of crisp white bucket seats, a color-matched dashboard, and a leather-wrapped steering wheel with a polished chrome center. The gauges from Classic Instruments are customized with RMD Garage’s logo, adding a subtle nod to the builder’s craftsmanship.

Tan patterned material covers the flooring, door panels, and headliner, offering warm contrast to the otherwise light interior. A custom center console trimmed in light wood features two cupholders, a nice touch. While the white color palette might raise questions about off-road practicality, there is no denying that the interior is an elegant and comfortable place to be.

Above the pristine interior sits a lift-off hardtop, revealing a polished chrome roll bar for safety and style. The rooftop luggage rack features a matching white and chrome trunk, rounding out the aesthetic with a touch of luxurious, adventure flair.
Whether basking in the SEMA spotlight or cruising through Long Beach on a sunny California afternoon, “Pure” lives up to its name. It’s a showpiece that has been carefully engineered, tastefully styled, while retaining the classic look of the very first model year of the Ford Bronco.

RMD Garage has once again proven their mastery of automotive art, breathing new life into a classic while staying true to its spirit. “Pure” isn’t just a truck, it’s a bold, clean, and built with purpose.

Follow @rmdsgarage on Instagram for more.

SEMA 2024: Nissan 300ZX Widebody by Shea Seefeldt

Posted on by
Reply

If there’s one thing the SEMA Show never fails to deliver, it’s bold builds that mix unexpected performance with radical style. These are the type of custom vehicles you will find in the Toyo Tires Treadpass pavilion. Among the many high quality vehicles at the 2024 event was a striking Nissan 300ZX Z23, built by Shea Seefeldt in collaboration with 10 Tenths Motorsports in Albuquerque, New Mexico.

This isn’t your average Z car. Under the hood, the original Nissan engine has been swapped in favor of American muscle: a GM LS3 V8. But it’s not just any LS3. It’s been upgraded with PRC heads from Texas Speed, dual valve springs, titanium retainers, and a GPI SS4 camshaft, giving it that extra boost of power.

The exterior grabs attention with a Pandem widebody kit, complete with enlarged wheel openings to house the aggressive stance and oversized rubber. The car rolls on gold-plated Rohana wheels that were designed in collaboration with Rocket Bunny, and wrapped in Toyo tires, of course.
Now, those dramatically flared fenders might not appeal to every purist out there, but I’ll be honest: I sort of dig them on this car. They give the 300ZX a lot more personality than the typical appliance aesthetic found in many Japanese cars.

This build is a perfect example of what happens when you combine creativity, craftsmanship, and a willingness to break the mold. This Z23 is not just a showpiece, it’s a statement.

For more, follow @shea_seefeldt and @10tenthsmotorsports in Instagram.

SEMA 2024: 1987 Jeep “Street Comanche” by Off Grid Research

Posted on by
Reply

Let me be honest, after three days at the 2024 SEMA Show, surrounded by an endless sea of overbuilt lifted show trucks, carbon fiber everything, and “tuner” builds that all somehow look exactly the same, it’s easy to get a little numb. You start to wonder if originality died quietly sometime around 2016. Then, just when you’re about to call it a day and write the same story for the tenth time, you turn a corner and see something that grabs your eye: a 1987 Jeep Comanche pickup. The truck’s baby blue and pink exterior looks like it drove straight out of a VHS racing montage.

This truck was built by Nate Lanken of Off-Grid Research. This particular Comanche is no ordinary Jeep. It is one of only 100 “Street Comanche” special editions ever made, commemorating the Archer Brothers’ 1988 victory in the short-lived but delightfully weird SCCA Race Truck series (1987–1991). Most of those trucks are long gone or forgotten, but this one has been resurrected with an updated twist on the factory race truck theme.
There’s nothing cookie-cutter about this Jeep. Off-Grid Research gave the Comanche a thorough mechanical refresh while keeping its character intact. The 4.0L inline-six under the hood isn’t exotic, but it is renowned for its reliability and toughness. Paired with a 5-speed manual, a lightweight flywheel, a 6-puck clutch, and a Hurst shifter, it must be quite engaging to drive.

Cooling comes courtesy of an aluminum radiator and a CNC-machined solid fan hub, a combination that says, “Yes, this truck actually runs, and no, it won’t overheat after two blocks.”

Inside, the Comanche keeps the theme going with a pair of Corbeau limited edition racing seats. No digital screens or color-changing LEDs here, just function, form, and a throwback to when trucks were trucks and race seats meant business.

What really sets this build apart is the authenticity. The exterior features Off-Grid Research’s Evo II Body Kit and RaceRubi hood give the truck a muscular stance. The baby blue and pink wrap is a bit much, but it actually works pretty well on this truck.

The suspension has been lowered around 6 inches up front, and 5 inches the back, and it sits perfectly over a set of 20-inch American Racing Classic Torq Thrust II wheels. Finally, a build that isn’t lifted to the clouds or slammed into uselessness. It looks fast, ready, and importantly, fun.

In a show filled with open checkbook builds, endless crate engine swaps and flawless painted cars, this plucky Jeep Comanche was a breath of fresh air. The forgotten motorsports history adds an interesting note to this truck I already like, having owned one myself.

Nate Lanken and Off-Grid Research didn’t just build a truck. With the care and creativity put into this truck, it brought a little bit of personality back to the SEMA Show. And for that, I am grateful.

Check out www.ogrshop.com for more.

SEMA 2024: 1965 Buick Skylark “The Enforcer” by VRD Customs

Posted on by
Reply

There are certain types of cars that appear over and over again at the SEMA Show, such as: first-gen Camaros, Dodge Challengers, and Ford Mustangs. All of these cars are popular with performance enthusiasts, and the cars are well-supported by the aftermarket industry. But after multiple days of walking the giant convention halls, the cars start to look the same.

Walking the floor at the 2024 SEMA Show, I passed by the STEK book and saw a very unique car that drew me in for a closer look. It was a wild custom 1965 Buick Skylark built by VRD Customs of Danbury, CT. The car is nicknamed “The Enforcer” and it blends modern technology with classic style.
The exterior is painted black, and every inch of the car is wrapped with a combination of Satin Black, Gloss Black, and Carbon Fiber paint protection film (PPF) from STEK. This gives it an interesting visual look.

The exterior is adorned with a carbon fiber hood, roof, and trunk lid, as well as front aero components, including a large front air dam. Sticking up through the hood are a pair of twin turbochargers, hinting at the performance under the surface.

Hidden under the front carbon fiber canards are night vision cameras, which are an unusual feature you don’t typically see on a high-performance drag car.
Speaking of performance, this Skylark features a 350 cubic inch Small Block Chevy engine with twin turbos, producing a strong 1,400 horsepower on 93 octane fuel. It has a custom fuel delivery system with two injectors per cylinder, and the whole thing is managed by a Haltech ECU. This is an interesting choice to go with a Small Block Chevy instead of an LS-based engine, and one that I think is pretty cool.

Even with all this performance, the car doesn’t skimp on driver comforts. It includes air conditioning, power steering, and Wilwood hydroboost brakes to help make it more comfortable and controlled on the street. Yes, this car is street legal!

The custom steel widebody fenders give the car a wider, aggressive stance. You’ll also notice the side-exit exhaust pipes just in front of the rear wheels, which add to the hot rod look. It rides on air suspension at all four corners, allowing for ideal height adjustment depending on road or track conditions. The car rides on Billet Specialties wheels with wide drag slicks in the back.
Inside, the car is fitted with Braum seats and G-Force harnesses, providing both safety and comfort. A full roll cage has been installed and painted gloss grey, adding structure and reinforcement to the car’s A-body chassis. Additional comforts include Bluetooth, navigation, and Wi-Fi modules.

Open the trunk, and you’ll find an interesting layout: dual fuel cells and a nitrous bottle are mounted over the rear-mounted radiator and transmission cooler. There is so much going on with this car that it really takes a while to let it sink in.

While it may look intimidating at first glance, The Enforcer is a no-compromise build that mixes vintage muscle and modern tech. Instead of having this or that, have both! VRD Customs has taken the classic Skylark and turned it into something truly special, a drag racing beast that can also be driven on the street. I enjoyed checking out this car at the 2024 SEMA Show.

For more, follow @baggedttbuick on Instagram.