One of the most prominent custom car builders at the SEMA Show are the Ringbrothers, Mike and Jim Ring from Wisconsin. They show up not once in a while, but every year consistently with multiple wild custom builds that take advantage of composite materials, 3D printing, CNC machining, and some truly unique design ideas. The Ringbrothers have captured numerous top awards including the overall winner at Battle of the Builders in 2022. For 2023, they returned to the SEMA Show with a completely resto-modded 1969 Dodge Charger nicknamed “TUSK.”
The car is a complete re-imagining of the classic Charger with modern materials and performance. It is not to be confused with the ’69 Charger “Defector” that the Ringbrothers built in 2020. The “TUSK” Charger has a beautiful black and gold paint scheme that really looks great. The paint is BASF’s Glasurit Waterborne and the color is GM WA8555 Black.
Under the hood is an all-aluminum supercharged 426 / 7.0L Hemi V8 “Hellephant” crate motor producing 1,000 horsepower and 950 lb-ft of torque. Just 100 units of this engine were produced as a crate motor. Coupled to that is a Bowler Performance TREMEC T-56 Magnum six-speed manual gearbox with the classic “pistol grip” shifter that the Charger is known for.
The original B-body chassis has been replaced by a Roadster Shop Fast Track chassis. This not only provides a lower stance, it completely strengthens and upgrades the car’s performance and handling to modern standards.
Other improvements include an independent rear suspension, Baer Brakes Extreme 6S six-piston calipers. The car rides on a set of Ringbrothers “TUSK” Edition HRE Wheels which measure 19×10.5 in the front and 20×13 in the rear. The wheels are wrapped in Michelin Pilot Sport 4S tires for maximum grip in the corners.
At this point, people have come to expect the very best work from the Ringbrothers. They say that more than 5,000 man hours of labor went into this car. From the sheet metal to the paint work to the engine bay and interior, “TUSK” is a full custom built car done to the very highest standard possible – as only they can do it.
As a seasoned attendee of the SEMA Show for the past 10 years, I have seen dozens of different custom car builders put their own spin on the first-generation Chevrolet Camaro. The 67-69 F-body has been chopped up, remixed, and reinterpreted as a resto-mod, g-machine, pro touring car, and everything else. It would seem that there is nothing left to do with the F-body platform, or is there?
This 1969 Chevrolet Camaro “Strode” from Ringbrothers debuted at the Keystone booth at the 2022 SEMA Show in Las Vegas, along with three other Ringbrothers builds at the show. Like all Ringbrothers builds, the car has a one-word name, which is “Strode” for this car.
The name is a reference to the 1978 slasher movie “Halloween” which stars Jamie Lee Curtis as Laurie Strode. A butcher knife emblem with the word “Strode” on it appears throughout the car and is one of many custom touches throughout this build.
The car is much more than a simple restomod, where your local garage drops a crate engine into an old body. This car is a complete reimagination of what a Camaro could be. A staggering 6,500 man hours went into building this one-off car that retains only two parts from the original car – two pieces of side glass.
Though it looks like a Camaro, the car’s body is made of 100% carbon fiber. The Ringbrothers have done full carbon fiber cars before, such as their 2015 build of a 1965 Ford Mustang “Espionage.” The Strode Camaro is the latest high-end build from the brothers to use the extremely strong and light weight material.
Furthermore, the car’s proportions have been stretched and pulled – the body is five inches wider in the rear and three inches wider up front. The rocker panels were lowered, the center of the roof has been recessed, and the hood is longer and reshaped. The front and rear bumpers, diffusers, valences, and spoiler are also made from carbon fiber. The car is painted with BASF Glasurit Ghost White paint, except for the hood, roof, and A-pillars which are black. It’s an insane build from tip to tail, and that’s just the body of the car!
Under the hood is a Wegner Motorsports LS3 V8 engine with a Whipple supercharger that produces a healthy 1,010 horsepower. The engine is painted orange and really pops in the all-white engine bay, where all of the wires and hoses have been concealed. a Holley Dominator EFI system delivers fuel to the thirsty beast of a motor.
Power is routed through a Bowler Tremec T-56 six speed manual gearbox and into a 9-inch rear end from John’s Industries. A carbon fiber driveshaft from QA1 is another modern touch on this muscle car.
A custom Ringbrothers exhaust with Flowmaster Super 44 mufflers ensures the proper sound when the accelerator pedal is mashed. The car’s handling has been vastly improved with a hydroformed subframe from Detroit Speed Engineering. A Fast Track front suspension and independent rear suspension from Roadster Shop bring modern handling and driveability to the Camaro, while QA1 Mod series coilovers absorb the bumps.
The car rides on Ringbrothers’ signature five-spoke G-CODE wheels, which they developed with HRE Wheels. They measure 19×11 in the front and 20×12.5 in the rear and are wrapped in a set of Michelin Pilot Sport 4S high-performance tires.
Bringing everything to a stop is a Baer Brakes 6-piston disc brake system, with an E-Stopp emergency brake. The car has a full custom interior and dashboard by Steve Pearson at Upholstery Unlimited in Clinton, IA. The custom dashboard, center console, bucket seats, and door panels are all done in saddle tan with custom stitching. The rear seat has been deleted, reducing the car’s overall weight.
Driver comforts include Dakota Digital gauges, a Vintage Air Gen IV HVAC system, and a Kenwood stereo with JL Audio sound system.
The car is full of custom touches including many billet machined and 3D printed parts. A careful eye will observe the knife-shaped recess in the front fenders, the trick custom taillights, the trunk-mounted fuel door, custom center-exit exhaust, and many other changes from the original Camaro.
While I thought I had seen it all when it comes to early Camaros, the Ringbrothers from Wisconsin have shown that there is still plenty of imagination left in the world with their customized 1969 Chevrolet Camaro.
One of my favorite custom car shops is the Wisconsin-based duo of Mike and Jim Ring, and their shop Ringbrothers.
The brothers made their debut at the 2005 SEMA Show, and in 2006 captured the Mothers’ Polish award for their customized 1967 Mustang nicknamed “Reactor.” In 2014 they won a Chevrolet Best of Show award for their 1966 Chevelle “Recoil.”
The shop builds one to two cars per year, which are highly customized with one-off parts. What sets them apart from other builders is their attention to detail, and their impressive ability to manufacture custom parts using everything from carbon fiber to 3D printing to CNC machining.
Since 2005, their custom car shop has expanded as a parts supplier of high quality hood hinges, door handles, hinges, and other hardware.After sitting out the 2020 and 2021 SEMA shows, the Ringbrothers returned to SEMA 2022 in a big way, with four full custom builds on display throughout the show.
One project that caught my eye was the 1969 Ford Mustang Mach 1 “Patriarc” which was on display at the Centerforce booth. The car starts with the 580-horsepower 5.2L V8 “Aluminator” crate engine from Ford Performance, coupled to a Bowler Tremec T-56 Magnum six-speed manual gearbox and a Strange Engineering 9-inch rear end.
The car rides on a set of Ringbrothers signature G-Code wheels that were developed with HRE for the G-Code Camaro in 2016. The wheels are wrapped in Michelin Pilot Sport 4S tires. Handling is vastly improved thanks to an independent front and rear suspension using Roadster Shop Fast Track components with Penske Racing RS Edition coilovers. A Baer disc brake system with six-pison calipers and massive 14-inch rotors provides serious braking force.
Build time on the Patriarc Mustang is over 5,000 man hours. The body was widened two inches in every direction, and the rear quarter panels have been lowered. This required fabricating a new floor pan and transmission tunnel from sheet metal. While they were in there, they added a roll cage, too.The list of carbon fiber parts includes the air scoops, hood, and rear diffuser.
It is impressive that after building more than a dozen different one-off Mustangs, the Ringbrothers continue to push the boundaries of the resto-mod world with their creations. The Patriarc Mustang Mach 1 is a remarkable car from every angle.
Along the banks of the Wisconsin River in the sleepy town of Spring Green, WI, there is a hot rod shop owned by two brothers. It is here that Mike and Jim Ring, also known as The Ringbrothers, create their unique brand of automotive art. These guys are one of my favorite hot rod builders, and I have featured their amazing work several times before:
Their latest creation is this heavily customized 1965 Ford Mustang, which they nicknamed “Splitr.” I saw it on display at the 2015 SEMA Show in Las Vegas.
One of my favorite custom car builders are the Ringbrothers (Mike and Jim). I’ve featured their work on this site in the past, including the Mustang Mach1 “Dragon” and the Blizzard Mustang. Taking a break from their usual Fords, they recently wrapped up the build of this 1966 Chevelle nicknamed “Recoil.”
Even among a convention center full of custom cars, this one really stands out. For one thing, the car has no carpet at all. In fact there’s almost nothing soft abou the interior, save for the “seats.” The seats look like a cross between a fighter jet and some kind of bizarre 18th century medical device. Whereas most car guys would bolt in a nice set of Recaros or Corbeaus, these guys completely custom fabricated their own seats – which I think are one of the most interesting parts of the car. It’s the Ringbrothers’ attention to details that really puts them in a league of their own. Continue reading →
Imagine for a moment that the 2013 SEMA show was transformed into a high school cafeteria.
The Mustangs, Camaros, Chevelles and Novas would be the cool kids, flexing their muscles and throwing a football back and forth while the girls swooned over them. The Hyundai Genesis Coupes and the Scion FR-S/Subaru BRZs would be the geeks, wiping off their glasses as they rewire their ECUs. The Jeeps and lifted/baja/prerunner trucks would be the band geeks, a tightly-knit group who knows that all they’ve got is each other.
Then you have the DeTomaso Pantera. While it came with a big V8 engine and was sold in Ford Dealerships, this car doesn’t fit in with the rest of the crowd. It is closer to an exotic car than a muscle car. Its mid-engine layout, low production numbers, and premium price tag place it in a different social class from the other cars. At a show like SEMA, the Pantera is something of a misfit.
One of the most prominent custom car builders at the SEMA Show are the Ringbrothers, Mike and Jim Ring from Wisconsin. They show up not once in a while, but every year consistently with multiple wild custom builds that take advantage of composite materials, 3D printing, CNC machining, and some truly unique design ideas. The Ringbrothers have captured numerous top awards including the overall winner at Battle of the Builders in 2022. For 2023, they returned to the SEMA Show with a completely resto-modded 1969 Dodge Charger nicknamed “TUSK.”
The car is a complete re-imagining of the classic Charger with modern materials and performance. It is not to be confused with the ’69 Charger “Defector” that the Ringbrothers built in 2020. The “TUSK” Charger has a beautiful black and gold paint scheme that really looks great. The paint is BASF’s Glasurit Waterborne and the color is GM WA8555 Black.
